The,Ultimate,Guide,Fitting,Doo homerepair how to The Ultimate Guide to Fitting a Door Lock
Elegance and style are mostly the factors why timber flooring is well-liked to home builders. Aside from that, timber flooring is one of the most gorgeous and long-lasting flooring options that any homeowner could make. It's going to add val This year when you go up into the attic to get the Christmas decorations take a look around the attic to see if there is any frost on the roof ceiling or rafters. If there is then you have a moisture problem that should be taken care of. Moi
We all need home security and a door lock plays a big in it. The stronger your door locks are the more secure your home will be. Buying a mortise deadlock would be preferably, as that can be locked from both sides. Actually fitting a door lock is a constructive and interesting act, so why are you waiting for, let get to know how to fit a lock on your door?Things needed for fitting a door lock:1. Drill2. Flat bit3. Tape measure4. Cylinder rim lock5. Screwdriver6. Masking type7. Drill bit set8. Junior hacksaw9. Chisel10. Mallet11. Ruler12. PencilOnce you got all the above tools, then follow the instructions below and start on fitting the lock:Marking the position: You will have a paper template provided to the door, tape it and dot the lock body and screw hole positions.Drilling the hole: - You will need a wide flat bit (preferably 32mm or 1.25in) for drilling the hole for the lock, get your door on a portable workbench and start on drilling the hole. Make sure to set your drill on high speed, as a low speed can cause of splinter. Double check the hole either the cylinder can be fitted as it needed to be or not.Fitting the lock together: - Make holes for screw fixing using a narrow drill bit and then fit the mounting plate to inside of the door carefully. Find the measuring bar against the manufacturer's instructions to pass the cylinder through the door from the external. To make the lock body more suitable and fit on the door, simply keep the casing in place and draw around the plate that covers around the edge of the door.Finishing: Fit the lock together on the back side of the door and fix all the screws. Twice check each thing if they works smoothly or not, especially check the key. In the end, mark the position of the bolt on the door frame to make sure the staple is Article Tags: Door Lock
The,Ultimate,Guide,Fitting,Doo