Basic,Components,Cellular,Syst technology Basic Components of Cellular Systems
The electronic cigarette is not new. People who buy electronic cigarette knows that this product has been in the market for years now. Despite some sectors apparently trying to shoot the product down from the shelves, the popularity of elect Active shredder safety technology for the small office. Shreds 15sheets per pass into 5/32" x 1-1/2" cross-cut particles (Security Level3). Patented SafeSense® Technology stops shredding when hands touch thepaper opening. Designated shredde
1. IntroductionThere are various cellular systems in the world, such as the GSM and CDMA. The design of these cellular systems are complicated but the architecture of most cellular systems can be broken down into six basic components. In this article, I will illustrate the six basic components that can be found in most cellular systems. 2. Six basic components of Cellular SystemsThe architecture of most cellular systems can be broken down into the following six components:a) Mobile Station (MS)A mobile station is basically a mobile/wireless device that contains a control unit, a transceiver and an antenna system for data and voice transmission. For example, in GSM networks, the mobile station will consist of the mobile equipment (ME) and the SIM card.b) Air Interface StandardThere are three main air interface protocols or standards: frequency division multiple access (FDMA), time division multiple access (TDMA) and code division multiple access (CDMA). These standards are basically the medium access control (MAC) protocols that define the rules for entities to access the communication medium.These air interface standards allow many mobile user to share simultaneously the finite amount of radio channels.c) Base Station (BS)A base station is a fixed station in a mobile cellular system used for radio communications with mobile units. They consist of radio channels and transmitter and receiver antenna mounted on a tower.d) DatabasesAnother integral component of a cellular system is the databases. Databases are used to keep track of information like billing, caller location, subscriber data, etc. There are two main databases called the Home Location Register (HLR) and Visitor Location Register (VLR). The HLR contains the information of each subscriber who resides in the same city as the mobile switching center (MSC). The VLR temporarily stores the information for each visiting subscriber in the coverage area of a MSC. Thus, the VLR is the database that supports roaming capability.e) Security MechanismThe security mechanism is to confirm that a particular subscriber is allowed to access the network and also to authenticate the billing.There are two databases used for security mechanism: Equipment Identify Register (EIR) and Authentication Center (AuC). The EIR identifies stolen or fraudulently altered phones that transmit identity data that does not match with information contained in either the HLR or VLR. The AuC, on the other hand, manages the actual encryption and verification of each subscriber.f) GatewayThe final basic component of a cellular system is the Gateway. The gateway is the communication links between two wireless systems or between wireless and wired systems. There are two logical components inside the Gateway: mobile switching center (MSC) and interworking function (IWF).The MSC connects the cellular base stations and the mobile stations to the public switched telephone network (PSTN) or other MSC. It contains the EIR database.The IWF connects the cellular base stations and the mobile stations to Internet and perform protocol translation if needed.3. ConclusionThis article aims to provide an introductory guide to the architecture of a typical cellular system and identify the six basic components found in most cellular systems. This article offers an insight towards how a cellular system is designed although different cellular systems may have variations in their own implementations.
Basic,Components,Cellular,Syst