How,Prepare,Woodwork,for,Paint homerepair how to How to Prepare Woodwork for Paint
This year when you go up into the attic to get the Christmas decorations take a look around the attic to see if there is any frost on the roof ceiling or rafters. If there is then you have a moisture problem that should be taken care of. Moi Elegance and style are mostly the factors why timber flooring is well-liked to home builders. Aside from that, timber flooring is one of the most gorgeous and long-lasting flooring options that any homeowner could make. It's going to add val
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable{mso-style-name:"Table Normal";mso-tstyle-rowband-size:0;mso-tstyle-colband-size:0;mso-style-noshow:yes;mso-style-parent:"";mso-padding-alt:0cm 5.4pt 0cm 5.4pt;mso-para-margin:0cm;mso-para-margin-bottom:.0001pt;mso-pagination:widow-orphan;font-size:10.0pt;font-family:"Times New Roman";mso-ansi-language:#0400;mso-fareast-language:#0400;mso-bidi-language:#0400;} Pre-painted wood If the existing paintwork is sound, there is no needto strip it back to bare wood. Simply wash the area carefully with a sugar soap(all-purpose cleaner) and water solution, lightly sand with abrasive paper,then remove any traces of dust before painting. Where there are patches of barewood, apply primer, then undercoat as normal. Finally, you should sand lightlybefore painting on the top coat. However, if the paint or varnish is chipped orblistered, you will have to remove it. Use a scraper to get rid of loosefragments; a triangular scraper, known as a shavehook, is handy for gettinginto tight corners and mouldings. For stripping large areas of wood, the choiceis between a chemical stripper and a hot-air gun. If you opt for the former,you will need to neutralize the surface, as recommended by the manufacturer,once the old paint has been removed. A hot-air gun will make light work ofremoving large areas of paint, but take care around windows, as the heat maydamage the glass. If you plan to paint over a faded woodstain, you willnot be able to remove the old finish. In this case, simply sand the area,remove the surface dust, then apply one or two coats of an aluminium-basedprimer before over-painting. Bare wood There is a three-step sequence to painting bare wood: - First, coat with a primer andlightly sand when dry. Wipe the surface with a lint-free cloth and white spirit(paint thinner). - Apply an undercoat as specified bythe manufacturer of the top coat you'll be using, and sand again. Remove anytraces of dust with a lint-free cloth moistened with white spirit. - Paint on the top coat. Normally,this will be a gloss finish, as it is hardwearing and easy to maintain. Whenvarnishing bare wood, sand away any rough edges, wipe off the dust, then applythe finish.
How,Prepare,Woodwork,for,Paint