How,configure,authoritative,ti computer How to configure an authoritative time server in Windows Ser
----------------------------------------------------------Permission is granted for the below article to forward,reprint, distribute, use for ezine, newsletter, website,offer as free bonus or part of a product for sale as longas no changes a Gone are those times when the companies and the organisations didn't need a hi-tech system to handle them. Owing to the considerable increase in the business sector and thus, an enormous increase in the complexity of the organisational struc
Time synchronisation in modern computer networks is essential, all computers need to know the time as many applications, from sending an email to storing information are reliant on the PC knowing when the event took place.Microsoft Windows Server from 2000 onwards has a time synchronisation utility built into the operating system called Windows Time (w32time.exe) which can be configured to operate as a network time server. Windows Server 2008 can easily set the system clock to use UTC (Coordinated Universal Time, the Worlds time standard) by accessing an Internet source (either: time.windows.com or time.nist.gov). To achieve this, a user merely has to double click the clock on their desktop and adjust the settings in the Internet Time tab.It must be noted however, that Microsoft and other operating system manufacturers strongly advise that external timing references should be used as Internet sources cant be authenticated.To configure the Windows Time service to use an external time source, click Start, Run and type regedit then click OK.Locate the following subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters\TypeIn the right pane, right-click Type then click Modify, in edit Value type NTP in the Value data box then click OK. Locate the following subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\AnnounceFlags.In the right pane, right-click AnnounceFlags and click Modify. The AnnounceFlags' registry entry indicates whether the server is a trusted time reference, 5 indicates a trusted source so in the Edit DWORD Value box, under Value Data, type 5, then click OK.Network Time Protocol (NTP) is an Internet protocol used for the transfer of accurate time, providing time information along so that a precise time can be obtainedTo enable the Network Time Protocol; NTPserver, locate and click:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpServer\In the right pane, right-click Enabled, then click Modify.In the Edit DWord Value box, type 1 under Value data, then click OK.Now go back and click on HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters\NtpServerIn the right pane, right-click NtpServer, then Modify, in the Edit DWORD Value under Value Data type In the right pane, right-click NtpServer, then Modify, in the Edit DWORD Value under Value Data type the Domain Name System (DNS), each DNS must be unique and you must append 0x1 to the end of each DNS name otherwise changes will not take effect.Now click Ok.Locate and click the followingHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpClient\SpecialPollIntervalIn the right pane, right-click SpecialPollInterval, then click Modify.In the Edit DWORD Value box, under Value Data, type the number of seconds you want for each poll, ie 900 will poll every 15 minutes, then click OK.To configure the time correction settings, locate: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\config In the right pane, right-click MaxPosPhaseCorrection, then Modify, in the Edit DWORD Value box, under Base, click Decimal, under Value Data, type a time in seconds such as 3600 (an hour) then click OK.Now go back and click:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\configIn the right pane, right-click MaxNegPhaseCorrection, then Modify.In the Edit DWORD box under base, click Decimal, under value data type the time in seconds you want to poll such as 3600 (polls in one hour)Exit Registry EditorNow, to restart windows time service, click Start, Run (or alternatively use the command prompt facility) and type: net stop w32time && net start w32timeAnd thats it your time server should be now up and running.
How,configure,authoritative,ti