DIY,Repair,Car,Dents,the,paint car DIY Repair Car Dents
General Lee: For such a TSP platform, indeed, is the test of the ability to integrate the same time, just She always has been mentioned in the business platform is a completely independent intellectual property platform and our platform is t In the shape of the design, the Core wing broke through the traditional appearance of the other models, the Core-wing sense of movement and high-level sense of the high degree of balance, which must be improved, both in the interior styling
If the paint has simply flaked or has been scratched off the surface, just touch up the paint.If a steel surface has been pushed in and hasn't been badly creased, try to pop it back into place with a rubber plunger. Just moisten the edge of the rubber, place the plunger over the dent, establish suction by pressing down on the handle, and then pull it toward you.If you have small dents in a steel part, you can attempt to hammer them out by placing a flat piece of metal on the outer side of the vehicle and banging the dent from the underside with a flat-ended hammer.Removing a dent with dry ice. All you need to do is touch the dry ice to the dent for a few seconds and repeat the process until the dent is gone. Make sure you wear dry ice gloves.Removing a dent with hair dryer and compressed air. The process involves heating the dent with a hairdryer for 30 seconds to a minute. Next, quickly spray the area with compressed air for about 10 seconds.
DIY,Repair,Car,Dents,the,paint