DIY,Replacing,Your,Fuel,Inject car DIY Replacing Your Fuel Injectors
General Lee: For such a TSP platform, indeed, is the test of the ability to integrate the same time, just She always has been mentioned in the business platform is a completely independent intellectual property platform and our platform is t In the shape of the design, the Core wing broke through the traditional appearance of the other models, the Core-wing sense of movement and high-level sense of the high degree of balance, which must be improved, both in the interior styling
Replacing a dirty or plugged fuel injector in your car can fix numerous problems including rough idle, stuttering or slow throttle response. This guide provides you with instructions on how to change your fuel injector to improve your engine's performance.Open the hood and locate the fuel injectors. These should all be on a rail, on top of your engine. Then find the valve on the fuel line and connect it to the fuel injector tester.Test the fuel injection system. Use the fuel injection tester to find the pressure readings for each of the fuel injectors. This should allow you to locate the faulty injectors within the system and determine which need to be replaced.Disconnect the fuel line completely from the engine, so that no more fuel will be pumped into the injectors. Next start the vehicle in neutral and allow it to idle for a few moments, giving the injection system some time to completely clear of fuel.Next, remove the injector rail. Loosen the screws that hold the injector rail in place against the engine block. This should now give you access to the individual injectors.Locate the faulty injector and remove the electrical connection, before pulling it out of its seating. Replace this with a new injector and reattach the electrical connection. Repeat this process for all the injectors that failed the initial pressure test.Finally use the original screws to reconnect the fuel rail to the engine block and reconnect the fuel line. This is now the ideal time to turn on the ignition, leaving the car in neutral, so that you can observe the fuel injectors working.Once you have completed the replacement work, it's highly recommended to road test your car to ensure that the rough running engine has been fixed. Article Tags: Fuel Injectors, Fuel Injector, Fuel Line
DIY,Replacing,Your,Fuel,Inject