The,Ways,Replace,Audi,Front,Up car The Ways to Replace Audi Front Upper Control Arms (1)
In the shape of the design, the Core wing broke through the traditional appearance of the other models, the Core-wing sense of movement and high-level sense of the high degree of balance, which must be improved, both in the interior styling General Lee: For such a TSP platform, indeed, is the test of the ability to integrate the same time, just She always has been mentioned in the business platform is a completely independent intellectual property platform and our platform is t
The front suspension of the B5-chassis A4is a bit unusual, and thats probably a charitable way of putting it. Primaryamong its goofy characteristics is an arrangement of two separate upper controlarms to form the upper arm or wishbone. Each of these arms has a ball joint atits outer end. These two ball joints fit into holes at the top of the uprightand are held in place by a inch bolt. The pinch bolt is a source of frustrationto almost everyone who works on these cars. They are prone to corroding inplace, which can cause the bolt to break during its attempted removal. I thankmy lucky stars that when working on my Minnesotacar, a prime candidate for a difficult pinch bolt, it came off without a hitch.Its a great idea to hit your pinch bolt with a liberal application ofpenetrating lubricant well before you try to remove it. Spray both the nut andbolt ends, as well as the small gap between the ball joints. Youll note in the photographs that I havealready removed the spring and shock assembly. You can remove the uppermounting plate, control arms, and spring and shock assembly all at once if youwish. The only real difference is whether you remove the two nuts holding thetop of the spring/shock assembly to the upper mounting plate while it is in thecar or after it is out of the car. If you remove the whole assembly, you canavoid having to remove the two rubber plugs in the engine compartment abovethose nuts. Some of the steps and photos in thisproject are the same as those in the Front Springs and Shocks project.Reference that project for additional information about the front suspension,particularly if you plan to change the springs or shocks along with the uppercontrol arms. This is the dreaded pinch bolt mentionedearlier. Ill pointing to the nut on the forward side of the bolt. This longnut and bolt help hold the ball joints at the ends of the two upper controlarms in place by pinching that portion of the suspension upright. Many peoplehave reported that this bolt is difficult or impossible to remove, particularlywhen corrosion is present. A soaking in penetrating lubricant should help. Itsa good idea to have a spare pinch bolt prior to removal just in case it isdamaged when removing. Find out more about Audi control arm Chinamanufacturer by visit lemdor.com.
The,Ways,Replace,Audi,Front,Up