Vehicle,Preparation,for,Repain car Vehicle Preparation for Repainting a Car
General Lee: For such a TSP platform, indeed, is the test of the ability to integrate the same time, just She always has been mentioned in the business platform is a completely independent intellectual property platform and our platform is t In the shape of the design, the Core wing broke through the traditional appearance of the other models, the Core-wing sense of movement and high-level sense of the high degree of balance, which must be improved, both in the interior styling
It is one of the most important steps thatconsiders car painting, actually a lot of people likes to say that 90 percentis preparation, and the rest is the actual car repainting. Even if you might get a professional paint jobfrom carpaint shop that you prefer, it is good to prepare it for the carrespray yourself and that way save some money and alsoin the same time you exactly know that car is prepared well for the job. To begin this process, firstly you should remove as much of the trim asspossible from all areas that will be painted. Trim, mirrors, bumpers, grille,and other exterior items are all included in that process. As you will beputting it all back later on, remember how everything comes off. Washing is thenext step so use a sponge and car washsoap to remove any dust, dirt and other difficulties on the surface of the car.To get rid of any wax or road grime use wax amd grease. Then dry the car.On the areas that was not removed, use more thicker type of a tape so that itwill protect these areas from the sanding which will be your next thing to do. Startsanding the old paint, using a 180 grit sandpaper. Always sand smoothly, to getrid of paint far to the point where you remove any possible scratches on it. For these use adual-action orbital air sander, which is less likely to dig in than othersanders, but remember that you shouldn't use it too close to the trims andchrome as these areas will be hand sanded. Take a piece of sandpaper and foldit in half, then sand any areas that were missed. After sanding you can removethe tape that was applied before that.Blow all the sanding dust off the car with air hose and then mask off the carfor the primer coat. With masking tape and paper, cover anything that shouldnot be painted and do one more wipe-down just prior to applying theprimer/filler coats. Apply several thin coats of a quality sandableprimer/filler to the entire car. Allow this to dry completely. Wet sanding ofthe primer is done with 400 grit wet/dry sandpaper. Keep your sanding area wet.Remember, the smoother the surface is, the smoother the paint will go on later.Now just remove all masking tape and paper and thoroughly clean the car and then dry it.Like said before doing preparation work yourself can hugely benefit you. As costof repainting a car differ, this way you will save up some moneyand got a great paint job guaranteed.
Vehicle,Preparation,for,Repain