Save,Your,Scooter,Repair,Money car Save Your Scooter Repair Money - How To Do Your Own Oil Chan
General Lee: For such a TSP platform, indeed, is the test of the ability to integrate the same time, just She always has been mentioned in the business platform is a completely independent intellectual property platform and our platform is t In the shape of the design, the Core wing broke through the traditional appearance of the other models, the Core-wing sense of movement and high-level sense of the high degree of balance, which must be improved, both in the interior styling
Changing the oil in our Chinese gas motor scootersis vital in ensuring its proper functioning. Most of us have thetendency to ignore this and as a result end up burning-up our engines.When changing oil, we do not need to go to a mechanic.. Why spend moneyfor labor when we can change the oil ourselves? Beforeproceeding with the oil change, lets make sure we have everything wened. We will need a socket set or adjustable wrench, and an oilcollection pan or mini container with a wide mouth (a cut-in-half openmilk-carton works great). Of course, we will need oil; we can use anytype oil except 30 weight use 10/40, 15/50 or any combination of a10-15/40-50 weight just dont use a 30 weight. To begin thescooter oil change, put the scooter on the back stands so the scooteris level. Look for the larger bolt under the scooter below the engine.When you remove this large bolt, have your container ready to catch theoil. Once the bolt/cap come off, let it simply drop into the container,as the spring and oil screen are also going to come out. Let it allfall into the container. Once the oil has stopped draining, remove thebolt, spring and oil screen and clean them off. Rinse the oil screenand hand dry. Inspect the oil to see if it has a milky color.This would mean that there is water leaking in other parts of thescooter and should be taken to a mechanic to reseal the gearbox.Otherwise, replace the oil screen, the spring and the bolt to thebottom of the scooter. A caution about adding oil: Dont add toomuch oil. We have had just as many burnt engines come to our repairshop due to people adding too much oil instead of not having enough oil. Startadding the oil. After you pour in some oil, stop and let the oil draininto the bottom for about 15 seconds before measuring. When measuringoil, the dip stick does NOT need to be screwed in. Simply stick it inas far as possible without screwing it back into the oil spout and pullit out to see how much oil is on the stick. Once the oil level is halfway it is ok to stop adding oil. A good tip is to start the scooter,let it run for 1-2 minutes, shut it off and wait about 2 minutes. Thenrecheck the dip stick to see the oil level. If you are a visuallearner, there are videos on the internet that show us step by step howto complete and oil change. A good place to go is www.scooterstock.com. They have several videos on diy scooter repair. They even have an online chat if we have any questions.
Save,Your,Scooter,Repair,Money