Point,Checklist,Help,Your,Car, car 10 Point Checklist To Help Your Car Pass Its MOT
General Lee: For such a TSP platform, indeed, is the test of the ability to integrate the same time, just She always has been mentioned in the business platform is a completely independent intellectual property platform and our platform is t In the shape of the design, the Core wing broke through the traditional appearance of the other models, the Core-wing sense of movement and high-level sense of the high degree of balance, which must be improved, both in the interior styling
But what does the MOT tester look out for? Is it car tyres or fuel emissions? It can become expensive when the vehicle fails and needs to be re-tested. To help achieve a first time pass, this 10 point checklist highlights the main components that are included in an MOT test:1. BrakesThe cars brakes are tested on a roller brake tester to assess their condition, performance and efficiency. Brakes that lock up when applied will fail. Other areas to watch out for are loose brake pedals and signs of leaking brake fluid.2. Doors and MirrorsEnsure the doors open and close correctly, from the inside and the outside of the vehicle. Car locks need to work adequately. Wing and rear view mirrors must be present and in good condition. A cracked wing mirror will result in a fail.3. Exhaust System and EmissionsThe car will need to pass specific exhaust emission requirements, depending on its age and fuel type. The exhaust system must not have holes or leaks, often caused by rust.4. Car BodyworkExcessive rust corrosion, damage or sharp edges on the cars bodywork will result in a fail.5. Wheels and Car TyresThe tread depth on a car tyre must be a minimum of 1.6mm. The car tyre needs to be the correct type for the vehicle and have no signs of excessive wear or damage. It is recommended to consult a car tyres specialist to check this. Ensure all the wheel nuts are present as any missing will result in a fail. Spare tyres are not tested.6. Windscreen, Wipers and WasherThe wiper blades need to be in good condition and the windscreen washer must contain fluid. The windscreen cannot have any large cracks and must have clear visibility.7. Lights and IndicatorsAll lights and indicators need to work correctly, including the hazard lights. Check that the headlamps dip to the correct angle and are not loose.8. Seats and seatbeltsEnsure all seats are secure in the upright position. It is compulsory for seatbelts to be fitted in the front and back of a car. They must be the correct type and in good, working condition.9. Steering, suspension and hornAll three need to be in good condition and work correctly. Make sure the horn is the right type for the vehicle. Ensure the wheels are correctly aligned and the car tyre pressures are correct, as these can affect the vehicles steering.10. Registration Plate and Vehicle Identification NumberThe registration plate needs to be in the correct format, legible and in good condition. Every car used after the 1st August 1980 must have its vehicle identification number clearly displayed. Lights, brakes, suspension and car tyres are the four most common reasons why a car will fail its MOT. This checklist is intended as a guide to improve your cars chance of passing. If in any doubt we recommend consulting your local garage before taking the MOT test.
Point,Checklist,Help,Your,Car,